 |
 |
 |
|
Concrete Countertop Edge Forms
2" Spiral Edge Mold 2" x 8'
- Edge form liners are used to
create detailed edging on countertops, pools, and steps.
- Made from the BEST mold rubber available. Beware of cheaper grade mold rubber products.
- Doesn't crack
- No air bubbles
- Won't get brittle
- Won't flake
- Keeps the pattern you are creating consistent
- Can be used in pre-cast or
poured in place concrete work.
- Fast and easy to place in a
mold, and quick to clean after use.
- Place edge mold in your form
and either silicone in place, nail with a small finish nailer, or screw
through the backing form into the form.
- For most applications, run a
silicone a bead across the bottom edge of the form, and up any corners,
and across any joined together seams, to create a tight seal.
- Use of a rubber safe form
release, pol-ease 2300 is recommended, but not necessary. Form release
generally will create a smoother finish on the concrete, less air pockets
in the concrete edge, and easier to clean the edge mold when finished.
- Clean with a stiff brush and
water after each use. Any silicone left on the forms should be peeled or
scraped off. - Store edge mold out of
direct sunlight, laid out flat.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Description
2" Spiral Edge Mold
|
|
|
|
|
|
|